Rigs for sale

Rig spare parts - any make or model

New Addition
Wilson 42 - Carrier Rig

Re-Manufactured Wilson 42, Double Drum, 5 Axle Mobile Rig
Option I - 96 Ft. Derrick with 250,000 LB. Static Hook Load
Option II - 102 Ft. Derrick with 300,000 LB. Static Hook Load

Mast NDT tested and recertified
New chassis and suspension
New hydraulics
New Cummins 425 HP engine
Rebuilt Allison or Standard transmission - customer's choice
All new tires

Delivery: 160 days

Wilson 42 - Carrier Rig - photo 1

Wilson 42 - Carrier Rig - photo 2

New Addition
Caldwell L-150

Caldwell L-150 Double Drum 2 axle Trailer Mounted Rig
96 Ft. Derrick with 180,000 LB. Static Hook Load
Good condition

Caldwell L-150 - photo 1

Brewster - N4

Rig is "Ready to Drill"

Following is a brief inventory for a rebuilt rig located in West Texas. Rig was rebuilt by owner for his own use and has not drilled other than 1,200 ft. for surface hole. Unit is still rigged up on location.

Mast is a Lee C Moore 300,000 # by 92ft Cable Scoping
Sub Structure is a 8 ft floor height x 16 ft wide set up; transports in 2 pieces 8 ft wide
Draw-works is a Brewster N4
Power is provided by Cummins 250 Diesel Engines - Compounded with Fawick Air Clutches
Rotary Table is a 17-1/2" Emsco
Mud Pump is a National 500 Duplex with South West Fluid Ends; powered by 750 hp Cat Diesel
Generator is a 250 kw with a Sulaire 68 series Air Compressor mounted on a 2 axle trailer
Mud Pits (2 ea) approximately 250 bbls ea with shakers and associated equipment
Agitating Tank is a 600 bbl unit
Water Tank is a 2,000 gal Aquarium Tank (double wall - interior is stainless) Plus 660 bbl tank
Dog House built by Lee C Moore
Rig Lights are all "New"
Drill pipe is 3-1/2" Grade E Double Wide Band (6,966 ft)
BOP is a 10-1/2" Regan 5,000 psi Annular with Hydraulic Unit for Power
Rig-Up Truck is a 1979 Ford 9000 with a 350 Big Cam Cummins Diesel with a Lo-Boy Trailer

Rig is "Ready to Drill"

Brewster N4 - photo 1

Brewster N4 - photo 2

Brewster N4 - photo 3

Brewster N4 - photo 4

New Addition
Wilson 42 Trailer Mounted Rigs
 

Rig I- 96 Ft. Derrick with 250,000 LB. Static Hook Load – To Be Re-Built

3 AXLE TRAILER MOUNTED WILSON 42
SINGLE DRUM
ENGINE 12V71 DETROIT DIESEL
MAST:  96 FT., 250,000 LB. CAPACITY
CHAIN CASE ROTARY DRIVE
150 TON HOOK/BLOCK COMBINATION
 

96 Ft. - Wilson 42

Rig II- 102 Ft. Derrick with 300,000 LB. Static Hook Load – To Be Re-Built

3 AXLE TRAILER MOUNTED WILSON 42
SINGLE DRUM
ENGINE 12V71 DETROIT DIESEL
MAST:  102 FT., 300,000 LB. CAPACITY
CHAIN CASE ROTARY DRIVE
150 TON HOOK/BLOCK COMBINATION
 

102 Ft. - Wilson 42

Substructure

400,000 # RATED CAPACITY, 150,000# SET BACK, WITH 250,000 LB ROTARY LOAD SIMULTANEOUS.

Wilson 42 Substructure - photo 1

Wilson 42 Substructure - photo 2

-SOLD-  Ideco H35  -SOLD-

Ideco H35 KD Double Drum Workover Rig.  This Rig has been refurbished and is ready to go to work. (see photos below)

Ideco H35

-SOLD- 2000 HP Drilling Rig  -SOLD-

Drawworks National 1320 UE, 2000 HP, complete with National Pumps, BOP's, Mud System, Derrick is a Branham Lo Lift Cantilever, 1,330,000 Lb. Capacity with 1,000,000 Lbs. Static Load Capacity. 
(photos not available)

Contact us for pricing and further information.

Let Oil Field Fabrication Services, LLC Experience and Resources be your One Stop Shopping Specialist.